The Blackmagic Design HyperDeck Studio Pro 2 is an external capture and play back device for BMD ATEM switchers. Key features include:
1RU video recorder for capture and playback
Records uncompressed 10-bit, ProRes, or DNx to SSDs
Compatible with all ATEM switchers
On-board display and illuminated controls
Pro-Grade File-Based Recording. The Blackmagic Design HyperDeck Studio Pro 2 records uncompressed Quicktime video at 10-bit with 4:2:2 color sampling. It also records to ProRes 422, ProRes 422 (HQ), ProRes 422 (LT), ProRes 422 (Proxy), Avid DNxHD, and Avid DNxHD MXF.
Dual SSD Slots. This recorder’s two 2.5-inch SSD slots give you the potential to record almost endlessly, since recording seamlessly switches to the second SSD once the first one fills up.
Thunderbolt Compatible. The built-in Thunderbolt port operates independently of the SSD ports, so that you can simultaneously record to SSDs and a computer. You can also play back footage from a computer into the recorder via Thunderbolt, which will make the signal available via the recorder’s SDI or HDMI outputs.
Video Signals. This recorder supports SD, HD, and 3G signals over SDI and HDMI. You get NTSC and PAL signals, 720 × 480p, and 720 × 576p support over HDMI, and 4K via 6G-SDI and HDMI. The built-in LCD on the front panel lets you monitor input and playback, in addition to timecode, format, and audio levels.
Output Options. Regardless of the original input, playback from a computer or SSDs is available from all outputs simultaneously. There are two exceptions: 4K output is only available over the 6G-SDI and HDMI connectors, while 480p and 576p are only available as HDMI output.
Intuitive Controls. You get VTR-style front-panel record and playback controls. The built-in jog wheel gives you analog-style control over playback. The buttons are illuminated, so you can easily work in low light.
When used with an ATEM switcher, you will need some form of ethernet hub (not included). If you have any questions about using the HyperDeck with you existing network contact us and a tech will be happy to help you determine if this is the right gear for you.
You can connect up to four HyperDecks to any ATEM running firmware version 6.8 or newer.
|Codec / Format Support||
REC 601, REC 709
1x Thunderbolt (for video/audio)
HDMI input is unable to capture from copy protected HDMI sources. Always confirm copyright ownership before capture or distribution of content.
Sony compatible RS-422 deck control port
Built-in LCD for video, audio and timecode monitoring
|Multiple Rate Support||
SDI and HDMI switchable between SD, HD and Ultra HD. SDI switches between 270 Mb/s standard definition SDI, 1.5G-SDI HD, 3G-SDI and 6G-SDI. Analog SD/HD
USB 2.0 high speed interface
12 buttons and jog wheel for local control / or use either RJ45 Ethernet or USB 2.0 high speed interface
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 425M
|SDI Metadata Support||
HD RP188 and closed captioning
2 × 2.5″ SATA 3Gb/s
Video: 4:2:2 Audio: 48kHz/24-bit
Blackburst or Tri-Sync