-
JOIN OUR WAITLIST
You've been added. Thank You!
×Blackmagic Design HyperDeck Studio 4K Pro
4 Day Rental Price:
$146.00
The Blackmagic Design HyperDeck Studio 4K Pro is an HDMI and 12G-SDI capable external capture and playback device for Blackmagic ATEM switchers that records to dual SSD or UHS-II SD bays. Key features include:
-
1RU broadcast deck for capture / playback over 12G-SDI or HDMI 2.0
-
Records uncompressed 10-bit, ProRes, or DNx to dual SSD or UHS-II SD card bays
-
Compatible with all ATEM switchers
-
On-board display and illuminated controls
Pro-Grade File-Based Recording. The Blackmagic Design HyperDeck Studio 4K Pro records uncompressed Quicktime video at 10-bit with 4:2:2 color sampling to ProRes 422, ProRes 422 (HQ), ProRes 422 (LT), ProRes 422 (Proxy), Avid DNxHD, and Avid DNxHD MXF formats. Footage can also be captured in H.264 and H.265 formats.
Dual SSD and SD Slots. This deck’s two 2.5-inch SSD slots give you the potential to record almost endlessly, since recording seamlessly switches to the second SSD once the first one fills up. Two hot-swappable UHS-II SD card slots are available as secondary recording options.
USB Type C Compatible. The built-in Type C port operates independently of the SSD ports, so that you can simultaneously record to external SSDs or media arrays as well as send a signal as a USB webcam to a computer.
Video Signals. This recorder supports SD, HD, and 12G signals over SDI and support for HDMI 2.0 for up to DCI 4K/60p. The built-in LCD on the front panel lets you monitor input and playback, in addition to timecode, format, and audio levels.
Intuitive Controls. You get VTR-style front-panel record and playback controls. The built-in jog wheel gives you analog-style control over playback. The buttons are illuminated, so you can easily work in low light.
Q & A
Will I need anything else?
-
This rental does not include SSDs, cables, or an ATEM switcher.
-
When used with an ATEM switcher, you will need some form of ethernet hub (not included). If you have any questions about using the HyperDeck with your existing network contact us and a tech will be happy to help you determine if this is the right gear for you.
-
You can connect up to four HyperDecks to any ATEM running firmware version 6.8 or newer.
Resources
SoftwareManual
| Audio Inputs |
Analog |
| Audio Outputs |
Analog |
| Brand |
Blackmagic |
| Codec / Format Support |
Uncompressed QuickTime |
| Color Precision |
10-bit |
| Color Space |
REC 601, REC 709, REC 2020. 33 point 3D LUTS can be applied to SDI monitor out. |
| Computer Interface |
USB Type-C 3.1 Gen 2 (up to 10Gb/s) for external drive recording, webcam out, software configuration and updates |
| Copy Protection |
HDMI input is unable to capture from copy protected HDMI sources. Always confirm copyright ownership before capture or distribution of content. |
| Device Control |
Sony compatible RS-422 deck control port |
| Display |
Built-in LCD for video, audio and timecode monitoring |
| Formats |
SD |
| Item Type |
Switcher |
| Multiple Rate Support |
SDI and HDMI switchable between SD, HD and Ultra HD. SDI switches between 270 Mb/s standard definition SDI, 1.5G-SDI HD, 3G-SDI and 6G-SDI. Analog SD/HD |
| Recorder Configuration |
Via user interface or Blackmagic HyperDeck Ethernet Protocol |
| SDI Compliance |
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑1, SMPTE 2082‑10, SMPTE 2084 and SMPTE 2108‑1 |
| SDI Metadata Support |
HD RP188 and closed captioning |
| SSD Interface |
(2) 2.5" SATA-II / III |
| Sample Rate |
Video: 4:2:2 Audio: 48kHz/24-bit |
| Sync Input |
Blackburst or Tri-Sync |
| Video Inputs |
Digital Video |
| Video Output |
Digital Video |
Blackmagic Design HyperDeck Studio 4K Pro
Cable - Monoprice SlimRun Cat6A Ethernet (7-foot / Yellow)
Case - SKB 3I-2011 9-inch Fly Rack 2U (H12)
Case - SKB 3I-2011 9-inch Fly Rack 2U (H12)
Charger - 3 Prong Universal Power Cord 6-foot
