Are you sure you want to do this?



Who should we e-mail when a
DJI RS 2 Gimbal Stabilizer
becomes available?

Want to add more than this item? Head to our waitlist builder


DJI RS 2 Gimbal Stabilizer

Gear Arrives On
Ships Back On
? ? ?
? ? ?

4 Day Rental Price:



*up to 2nd day air - overnight available

The DJI RS 2 Gimbal Stabilizer is a compact, single-grip gimbal designed to work with popular DSLR and mirrorless cameras up to 10 pounds. Key features include:

  • Supports up to 10 pounds of equipment

  • Designed for DSLR & mirrorless cameras

  • Offset roll motor enables monitoring from camera displays

  • 1950mAh battery grip for up to 12 hours of use on a single charge

What’s Changed? While DJI RS 2 might look similar to its predecessor, there are some key design differences. The two most notable upgrades from the DJI Ronin-S 3-Axis Gimbal Stabilizer are a 1.4-inch full-color touchscreen and carbon-fiber construction. Carbon fiber not only decreases the overall device weight, it also allows for heavier payloads up to 10 pounds.

Designed For DSLR & Mirrorless Cameras. The DJI RS 2 Gimbal Stabilizer is a lightweight and compact gimbal that DJI has designed for single-handed stabilization of DSLR and mirrorless cameras. The gimbal is capable of supporting up to 10 pounds of equipment for a wide range of camera and lens compatibility. Please note, not all camera control cables are included with this kit.

Offset Roll Motor. A DJI offset gimbal design keeps the roll motor positioned below a camera’s integrated monitor and helps reduce weight by eliminating the necessity for external monitoring. The design also improves stabilization when swapping between upright and underslung modes.

Great Battery Life. The RS can stabilize a camera for up to 12 hours with a single charge of its built-in battery, and charging a battery to full capacity will require approximately and and a half hour. Keep in mind that battery life will vary based on the weight and balance of the attached camera and lens.

Accessory Support. The Ronin S 2 has three USB Type C ports on the camera platform and two 8-pin near the control panel for connecting and powering compatible accessories for focus control, audio capture, and monitoring. 1/4"-20 & 3/8"-16 threaded sockets on the bottom of the grip provide multiple options for attaching the included tripod and other accessories. The camera platform itself uses a quick release plate to enable simplified balancing, setup and breakdown.

Removable Grip. The gimbal’s grip can be removed to open up the device to new mounting options. This opens the RS 2 to the option of becoming a jib-mounted, remote controlled pan and tilt head or to simply attach alternative control accessories such as optional two-handed grips. Do note that this requires yet-to-be-released accessory cables / mounts that are not included with the rental.

Q & A

  • What do I need to know about gimbal's battery life and charging?
    • You’ll get up to 12 hours of battery life from one charge, and the battery will take approximately one and a half hours to charge.

  • What is the gimbal’s default password?
    • The default password is 12345678.

  • What is the maximum supported weight?
    • The RS 2 can support camera & lens combos up to 10 pounds, but keep in mind that just because your gear is under weight does not mean it will balance well. If you have questions about specific cameras and lenses, please contact us.

  • Resources

  • Camera Compatibility
  • Quick Start Guide
  • Manual



    Item Type



    Maximum Payload

    • 10 lb
    Maximum Rotation Speed
    • 360°/s (pan, tilt, and roll)
    Controlled Rotation Range
    • Pan: 360° continuous rotation
    • Tilt: -112 to 214°
    • Roll: -95 to 240°




    • 16.1 × 10.2 × 7.7″
    • 2.948 lb (w/ camera plate, handlebar)
    • ¼”20 female thread
    • cold shoe
    • (2) NATO rail


    Power Supply


    • Type: 1950 mAh-15.4V LiPo
    • Compartment: Located in grip, Integrated
    • Type: USB
    Operating Time
    • Maximum: Approx. 12 hours
    • Charging Time: Approximately 1.5 hours
    Accessory Powering
    • (3) USB Type C


    DJI RS 2 Gimbal Stabilizer

    Cable - DJI R Multi-Camera Control Cable (Micro-USB)

    Cable - DJI R Multi-Camera Control Cable (Mini-USB)

    Cable - DJI R Multi-Camera Control Cable (Sony Multi)

    Cable - DJI R Multi-Camera Control Cable (USB-C)

    Cable - USB 2.0 A Male to Type C

    Case - DJI RS 2

    Case - HPRC 2400 (H24)

    Stabilizer Accessory - DJI R Briefcase Handle

    Stabilizer Accessory - DJI R Camera Riser

    Stabilizer Accessory - DJI R Lens Support

    Stabilizer Accessory - DJI R Lens Support Screw (M4)

    Stabilizer Accessory - DJI R Lens Support Strap

    Stabilizer Accessory - DJI R Metal Tripod (RS-005)

    Stabilizer Accessory - DJI Ronin BG30 Grip

    Stabilizer Accessory - DJI R Quick-Release Upper Plate (Short)

    Stabilizer Accessory - DJI RS 2 Tilt Arm

    Stabilizer Accessory - DJI RS Quick-Release Plate (Lower)

    Stabilizer - DJI RS 2

    USB Charger - Type-A 9V/2A 1-Port QC 3.0