Are you sure you want to do this?

JOIN OUR WAITLIST

Who should we e-mail when a
RED DSMC2 Touch 7-inch Ultra-Brite LCD
becomes available?

Want to add more than this item? Head to our waitlist builder

×

RED DSMC2 Touch 7-inch Ultra-Brite LCD

Gear Arrives On
Ships Back On
Total
? ? ?
?
? ? ?
?
Days
4

4 Day Rental Price:

$218.00

Shipping
Included*

*up to 2nd day air - overnight available

The RED DSMC2 Touch 7" Ultra-Brite LCD is an update to the RED DSMC2 Touch 7-inch LCD that increases monitor brightness by 6x and offers slightly increased contrast while reverting to a LEMO input. Key features include:

  • 7-inch, 8-bit RGB, 4:4:4 progressive scan, capacitive multi-touch LCD

  • 6 times brighter than the DSMC2 Touch 7" at 2200 nits

  • Uses a LEMO RED LCD/EVF cable for camera communication

  • Features 1/4-20" and 3/8-16" threaded holes for mounting

What’s Changed? The RED DSMC2 Touch 7" Ultra-Brite LCDis an update/redesign of the RED DSMC2 Touch 7-inch LCD, and they’ve changed a lot to make it a better fit for off-camera monitoring. The obvious is the 2200 nit LCD panel, but they’ve also swapped video input to the tried-and-true LCD/EVF LEMO cable and removed a built-in mounting solution. You’ll need an accessory arm to get the most out of this monitor rental.

RED Monitoring in Direct Sunlight. With the 6x bump in brightness, you’ll be able to monitor in sunlit locations with ease, and with more brightness comes a slight bump in contrast. Otherwise expect the same image quality you’ve come to expect from RED TOUCH monitors.

1/4-20 & 3/8-inch Mounting Holes. This monitor will not directly attach to a RED camera body like past models. It does, however, have a slew of 1/4"-20 and a couple 3/8"-16 threaded holes for use with accessory arms.

Compatibility. This monitor is only compatible with DSMC2 brains running firmware version 7.2 or newer. In addition to firmware compatibility, this monitor also uses a RED LEMOLCD/EVF cable for communication with the camera. We include a LEMO A adapter and 18" LCD cable which will work for must setups.

Q & A

How do I mount this monitor?
  • This monitor will not directly attach to a RED camera body like past models. It does, however, have a slew of 1/4"-20 and a couple 3/8"-16 threaded holes for use with accessory arms (not included).

Will this work with my RED brain?
  • This monitor is only compatible with DSMC2 brains running firmware version 7.2 or newer.

  • In addition to firmware compatibility, this monitor uses a RED LEMO LCD/EVF cable for communication with the camera, so if you’re using a DSMC2 brain, you’ll need to attach the included RED LEMO Adapter A to a POGO socket on your brain.

 

Brand

RED

Inputs/Outputs

Video Input

  • 16-pin 1B LEMO
Video Out
  • None

 

Item Type

Monitoring

Monitoring

LCD Panel

  • 7-inch LCD
  • Resolution: 1920 × 1200
  • Projected Capacitive (PCAP), multi-touch
  • PPI: 323

 

Physical

Dimensions

  • 5.7 × 5.7 × 1.4″
Mounting Points
  • ¼-20 (23x)
  • ⅜-16 (2x)
Weight
  • 1.45 lb)
Operating Temperature
  • 32°F to 104°F

 

RED - DSMC2 LCD Touch Ultra-Brite 7"

RED - DSMC2 Lemo Adapter A

RED - LCD/EVF Right-to-Straight 18" Cable v2