Are you sure you want to do this?

JOIN OUR WAITLIST

Who should we e-mail when a
Teradek Bolt 500 3G-SDI/HDMI Wireless Kit
becomes available?

Want to add more than this item? Head to our waitlist builder

×

Teradek Bolt 500 3G-SDI/HDMI Wireless Kit

Gear Arrives On
Ships Back On
Total
? ? ?
?
? ? ?
?
Days
4

4 Day Rental Price:

$280.00

Free

Shipping Included*

*up to 2nd day air - overnight available

The Teradek Bolt 500 Wireless 3G-SDI/HDMI Kit is an industry favorite for wireless video transmission. Key features include:

  • SDI and HDMI input and output

  • 1080/60p wireless monitoring at up to 500 feet

  • Sony L-series powered

  • 1:1 kit w/add-on capability

SDI and HDMI Input and Output. That’s right, the Teradek Bolt 500 supports cross conversion! You can input a signal from an SDI or HDMI source and output from either one on the other end.

1080/60p Wireless Monitoring. Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Teradek states that line-of-sight transmission is up to 500 feet without break-up or image degradation, and up to 100 feet without line-of-sight with less than 1ms latency. If you lose the signal, the Bolt 500 will instantaneously reconnect once you move back into range.

Multiple Receiver Streaming Capability. This kit includes one transmitter and one receiver; however, the Bolt 500 transmitter lets you send video to four Bolt 500 receivers simultaneously. You can rent additional receivers here.

Two New DFS Channels. Two newly introduced DFSchannels make it easier for you to operate without interference.

Sony L-Series Powered. We opted to add Sony L-Series battery brackets to this kit’s transmitter and receiver. You’ll get roughly five hours of use out of the two included Sony NP-F970 batteries. We also include one AC adapter and one Teradek 2-Pin LEMO to D-Tap Cable for use with Gold Mount and V-Mount setups.

Video cables not included!  With there being so many different variations of HDMI and SDI cables you could possibly need depending on your rig, we've elected to not bundle any video cables with the rental.  However, here are links our available cables: HDMI Cables & SDI Cables

Bolt Pro 500 3G-SDI Video TX

Video -

Video Inputs

  • • 1 x 75 Ohm BNC

Video Outputs

  • • 1 x 75 Ohm BNC (Loop-out)

Sdi Ancillary Data Support

  • • Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
  • • https://support.teradek.com/hc/en-us/articles/217446087

Usb30 Grab Engine Summary

  • • ~checkmark~

Inputoutput Summary

  • • 3G-SDI & HDMI

Color Sampling

  • • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

Tx Hdmi Sdi Converter Summary

  • • ~checkmark~

Latency Summary

  • • <0.001 seconds

Delay Tx To Rx

  • • <0.001sec (when no video format conversion is enabled)

Supported Resolutions -

Resolution Frame Rate Summary

  • • 1080p60

Supported Input Resolutions -

Supported Resolutions

  • • 1080p 23.98/24/25/29.97/30/50/59.94/60
  • • 1080psf23.98/24/25/29.97/30
  • • 1080i50/59.94/60
  • • 720p50/59.94/60
  • • 480p59.94/576p50 (via HDMI ports only)
  • • 480i(NTSC)/576i(PAL)

Video Processing -

Video Compression

  • • visually lossless

Color Correction

  • • CDL/1024 1D LUT (supports 10-bit color)
  • • 33x33x33 3D LUT (supports 10-bit color)

Audio Processing -

Audio Compression

  • • 48kHz 24-bit PCM

Inputs -

Audio Input

  • • Embedded Audio Input

Physical -

Size Tx Summary

  • • ~bold~24 x 66 x 102 mm

Dimensions

  • • 1"x2.6"x4.0"(24mmx66mmx102.1mm)

Weight Tx Rx Summary

  • • ~bold~217g / 299g

Weight

  • • 7.6oz(217g)

Construction

  • • Milled Aluminum(Chassis) and regulation-compliant PCB
  • • Plastic Cap

Interfaces -

Http

  • • None

Configuration Interfaces

  • • None

Switches

  • • On/Off and Reset Switch

Desktop App

  • • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

  • • Upgrade via Mini-USB

Network -

Wireless

  • • Non-DFS Frequencies:
  • • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • • EU & JP: 5.19 ~ 5.23 GHz
  • • DFS Frequencies:
  • • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • • EU & JP: 5.27 ~ 5.67 GHz

Rf Channel Selection

  • • Auto only (NOT configurable)

Encryption

  • • AES-128

Rf Power

  • • 17dBm EIRP

Range Summary

  • • ~bold~500 ft

Range

  • • Up to 500ft line of sight

Multicast Summary

  • • Up to 4 RX

Unicast Multicast

  • • Unicast / Multicast

Noise Rejection

  • • Can coexist with WiFi and 5GHz cordless phones

Rapid Reconnect Summary

  • • ~checkmark~

Number Of40 Mhz Channels Summary

  • • ~bold~11

Power -

Power Input

  • • 2-Pin Connector 7-28 VDC

Battery

  • • None

Nominal Power Consumption

  • • 7.3 Watts (Measured at 1080p60)

Operating Temperature

  • • 0 ~ 40 deg-C

General -

Mountability

  • • Multiple mounting options with 1/4" holes

Gen1 Sidekick Compatible Summary

  • • ~x~

Metadata Support Summary

  • • ~checkmark~

Bolt Pro 500 RX - 3G-SDI/HDMI Video RX

Video -

Video Outputs

  • • 1 x 75 Ohm BNC
  • • 1 x USB 3.0 micro B receptacle
  • • 1 x Type A receptacle HDMI

Sdi Ancillary Data Support

  • • Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
  • • https://support.teradek.com/hc/en-us/articles/217446087

Usb30 Grab Engine Summary

  • • ~checkmark~

Inputoutput Summary

  • • 3G-SDI & HDMI

Color Sampling

  • • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
  • • HDMI: RGB 4:4:4, 8-bit

Tx Hdmi Sdi Converter Summary

  • • ~checkmark~

Latency Summary

  • • <0.001 seconds

Delay Tx To Rx

  • • <0.001sec (when no video format conversion is enabled)

Supported Resolutions -

Resolution Frame Rate Summary

  • • 1080p60

Video Processing -

Video Compression

  • • visually lossless

Test Pattern Generator Support

  • • Custom output formatted test pattern over HDMI and SDI.

Color Correction

  • • CDL/1024 1D LUT (supports 10-bit color)
  • • 33x33x33 3D LUT (supports 10-bit color)

Audio Processing -

Audio Compression

  • • 48kHz 24-bit PCM

Inputs -

Audio Input

  • • Embedded Audio Input

Physical -

Size Tx Summary

  • • ~bold~24 x 66 x 102 mm

Dimensions

  • • 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)

Weight Tx Rx Summary

  • • ~bold~217g / 299g

Weight

  • • 10.5oz(299g)

Construction

  • • Milled Aluminum(Chassis) and regulation-compliant PCB
  • • Plastic Cap

Interfaces -

Http

  • • None

Configuration Interfaces

  • • No OLED Screen
  • • There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick

Switches

  • • On/Off and Reset Switch

Desktop App

  • • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

  • • Upgrade via Mini-USB

Network -

Wireless

  • • Non-DFS Frequencies:
  • • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • • EU & JP: 5.19 ~ 5.23 GHz
  • • DFS Frequencies:
  • • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • • EU & JP: 5.27 ~ 5.67 GHz

Rf Channel Selection

  • • Auto only (NOT configurable)

Encryption

  • • AES-128

Rf Power

  • • 15dBm EIRP

Range Summary

  • • ~bold~500 ft

Range

  • • Up to 500ft line of sight

Multicast Summary

  • • Up to 4 RX

Unicast Multicast

  • • Unicast / Multicast

Noise Rejection

  • • Can coexist with WiFi and 5GHz cordless phones

Rapid Reconnect Summary

  • • ~checkmark~

Number Of40 Mhz Channels Summary

  • • ~bold~11

Power -

Power Input

  • • 2-Pin Connector 7-28 VDC

Battery

  • Canon LP-E6N

Nominal Power Consumption

  • • 9 Watts (Measured at 1080p60)

Operating Temperature

  • • 0 ~ 40 deg-C

General -

Mountability

  • • Multiple mounting options with 1/4" holes

Gen1 Sidekick Compatible Summary

  • • ~x~

Metadata Support Summary

  • • ~checkmark~

Teradek Bolt Pro 500 SDI/HDMI Transmitter

Teradek Bolt Pro 500 SDI/HDMI Receiver

Monitor Accessory - Hot Shoe Mount

Monitor Accessory - Redrock microMount

D-Tap Cable - Teradek 2-pin LEMO

Battery - Sony NP-F970

Battery - Sony NP-F970

Charger - Sony AC-VQ1051D

Charger - Polarized Cable

AC Adapter - Teradek Bolt Pro 2-pin LEMO

Cable - USB 2.0 A Male to Mini-B

Teradek Bolt Pro Battery Plate - Sony L-Series

Teradek Bolt Pro Battery Plate - Sony L-Series

Teradek Bolt Pro Hardware Kit