
The SmallHD 703 Bolt Monitor w/ Bolt 500 XT Transmitter Kit is a wireless monitoring kit that bundles a 703 Bolt V-Mount Monitor and Teradek Bolt 500 XT Transmitter. Key features include:
1080p monitor w/ Teradek Wireless Rx & bundled Tx
SDI & HDMI transmitter inputs
Includes side handles, neck strap, & AB V-Mount plate
Teradek Bolt 500 XT Transmitter included
1080p Monitor, Receiver, & Transmitter. The SmallHD 7-inch 703 Bolt Monitor w/ Bolt 500 XT Transmitter Kit pairs a 703 Bolt V-Mount Monitor featuring an integrated Teradek Sidekick Wireless Rx with a Teradek Bolt 500 XT Transmitter to make this a functioning wireless system. Most of the features of the SmallHD 703 are here including a 7" 1080p display, SDI in & out ports, and bright 300 cd/m² lcd backlight. Please note that this kit is good for a maximum of 300 feet of wireless HD video with no perceptible latency, regardless of the transmitters reported working distance.
Teradek Bolt 500 XT Transmitter. Features include SDI & HDMI inputs capable of ingesting uncompressed 10-bit 4:2:2 1080p video at up to 60 fps. The Bolt 500 XT transmitter lets you send video to four Bolt receivers simultaneously, and you can rent additional receivers here.
Side Grips & Neck Strap. This kit is built as a director’s monitor and comes with contoured side handles and a neck strap to redistribute weight from your arms and prevent fatigue.
SDI & HDMI. The monitor accepts inputs up to 1080/60p via 3G-SDI, and second SDI port functions as another input or an output. Audio can be monitored through an 1/8" (3.5mm) headphone jack. We include an ultra-lightweight 2.6ft SDI cable for connecting cameras with BNC SDI video outputs.
Power. This kit includes a cable-less V-Mount battery plate for powering the 703 Bolt Monitor, while the Bolt 500 XT Transmitter will include a Teradek 2-Pin LEMO to D-Tap Cable. Additional V-Mount batteries & chargers can be rented for longer shoots.
Other Notable Features. The SmallHD PageBuilder OS allows you to set up discreet pages with augments like 3d LUTs, frame guides, HD scopes, focus assist, exposure control, and peaking tools. The IPS LCD display has a 160° viewing angle and 1150:1 contrast ratio to ensure that accurate colors are always represented.
How is this kit powered?
The SmallHD 703 Bolt V-Mount Monitor ships with an attached V-Mount battery plate for powering the device. We include one Anton Bauer Digital 90 Battery and LP2 Dual V-Mount Charger. Additional batteries and chargers available for rent separately can be found here.
The Teradek Bolt 500 XT Transmitter ships with a Teradek 2-Pin LEMO to D-Tap Cable used for powering the device. However, you’ll need to have some sort of power source with d-tap input.
If you are renting this kit from us but your setup doesn’t have a d-tap power source, you can rent one of the Teradek Bolt XT Sony/Canon Bidirectional Battery Plate to be pre-installed on the transmitter at no additional cost. However, do note it DOES NOTinclude batteries / charger and will cover the 3/8"-16 mounting hole on the back of the transmitter.
Does this kit come with a wireless transmitter?
Yes! This kit includes both the 703 Bolt V-Mount Monitor and a Teradek Bolt 500 XT Transmitter for a complete wireless kit.
Does the 703 Bolt monitor have an HDMI input?
No. The monitor itself does not have an HDMI input port, but the included Bolt 500 transmitter does and will allow for cameras with HDMI outputs to be wirelessly streamed to the monitor.
Brand |
SmallHD and Teradek |
Display |
Screen Size
|
Inputs/Outputs |
Video Inputs
|
Item Type |
Monitoring |
Monitoring Type |
Monitor |
Physical |
Weight
|
Monitor Accessory - SmallHD 703 Bolt Pairing Guide
Video Support - Teradek Bolt TX Mounting Bracket