Are you sure you want to do this?

JOIN OUR WAITLIST

Who should we e-mail when a
Profoto B2 250 Air TTL Location Kit
becomes available?

Want to add more than this item? Head to our waitlist builder

×

Profoto B2 250 Air TTL Location Kit

Gear Arrives On
Ships Back On
Total
? ? ?
?
? ? ?
?
Days
4

4 Day Rental Price:

$195.00

Free

Shipping Included*

*up to 2nd day air - overnight available

The Profoto B2 250 Air TTL Location Kit is a two-head, portable strobe kit designed for location work. Key features include

  • Two-head portable studio kit

  • Lithium-ion battery powered

  • Up to 215 full-power flashes

  • Compatible with Air Remote TTL Transceiver

Compact Size. The B2 was made for photographers on the go. The lithium battery-powered Power Pack measures just 6.3 × 3.1 × 6.7 inches and weighs 2.2 lbs., while the 4 × 4-inch head tips the scale at just 1.5 lbs. With each head connected via the tethered 6.5-foot cable, the B2 can be used off-camera on a light stand.

Battery-Powered Power Pack. While the B1 500 AirTTL serves as a wireless monolight, the B2 takes the form of a studio kit (for lack of better term) with separate power pack. The pack itself features an interchangeable lithium battery that provides up to 215 at full output, with a recharge time of just 45-60 minutes with included 2.8A battery charger. The power pack has inputs for up to two heads. 

Flash Output. The B2 250 AirTTL offers a 250 Ws maximum output, with 9 stops of adjustment in 1/10 or 1-stop increments. Maximum recycle time at full power is 1.35 seconds, and a Quick Burst Mode enables 20 fps at a reduced power level. Two additional modes (Normal and Freeze) allow you to prioritize faster flash duration or minimal color shift depending on your needs.

LED Modeling Light. The 9 W LED provides the equivalent of 50 W tungsten light.

Supports TTL Air Remote. The B2 250 AirTTL offers full TTLsupport when matched with one of the Profoto Air Remote TTL Transceivers for CanonNikon, or FujiPlease note that these are separate rental items.

Triggering Options. This strobe has a built-in Profoto Air radio receiver, allowing it to be triggered by either of the TTL remotes above. You can also use the Profoto Air Remote Transceiver if you’re comfortable with manual power adjustment. You’ll get 300 feet of range when triggering in TTL mode, and 1,000 feet with normal radio triggering. Additionally, there’s a 1/8-inch mini-sync input if you prefer using a sync cord, as well as built-in optical slave.

Angle of Light

70º

Brand

Profoto

Built-In Radio Range

330’ TTL and 1000’ normal

Built-In Slave

Optical

Color Temperature

5,600K

Dimensions

4 × 4″ head and 6.3 × 3.1 × 6.7″ power pack

Item Type

Lighting

Lighting Type

Strobe Kits

Modeling Output

50w equivalent

Mount

Universal up to 5/8"

Power Cord

None, battery-powered only

Recycle Time

1.35 second (Full Power)

Reflector

N/A

Stop Adjustment

9.0 stops (2-500W/s) in 1/10 or 1-stop increments

Strobe Output

250w

Sync Input

1/8" Mini

Sync Voltage

5V

Weight

5.2 lbs. w/battery

Cable - USB 2.0 A Male to Micro B

Case - Profoto B2 Location Bag

Charger - Non-Polarized Cable

Strobe Accessory - Profoto B1 / B2 Battery Charger 2.8A

Strobe Accessory - Profoto B2 250 Battery

Strobe Accessory - Profoto B2 250 Battery

Strobe Accessory - Profoto B2 250 Power Pack

Strobe Accessory - Profoto Plastic Flat Cap

Strobe Accessory - Profoto Plastic Flat Cap

Strobe - Profoto B2 Flash Head

Strobe - Profoto B2 Flash Head

Strobe Trigger - PC to Mini 1/8" 15ft