If you're searching for a gyro, you already know how useful they are for removing unwanted camera movement. There are practical applications for both stills and video capture. In the realm of still photographs, a gyro gives you the ability to shoot at much lower shutter speeds when use of a tripod is inconvenient or impossible. Such applications would be shooting from a vehicle (car, boat, plane, helicopter) or structures that are inherently unstable & prone to vibration such as a bridge. Shooting car to car tracking shots is possible at shutter speeds below 1/30th of a second which results in beautiful background blur.
Gyros have a wide range of applications for video. Most obvious is stabilization while shooting from helicopters or aircraft. The thing to remember with Gyros is that they are designed to be stable and lock-on to a heading. When utilizing them for video, it is important to make any camera movements slow and deliberate. If you try to pan or tilt too quickly the unit will kick back destabilizing your shot. Smooth and deliberate movements are the key to getting great footage.
Some additional tips for success: Due to the high mass of the gyro wheels, you'll want to attach your camera prior to starting up the gyro. Once you've mounted the gyro, set the unit down and allow 6-8 minutes for it to get up to speed. Moving the gyro while it is spooling up will cause longer start times. Conversely, allow the gyro to spin down when you are finished shooting before removing it from your camera gear. You can also improve performance by removing as much weight as possible from your camera & lens. Additional gyro effect can be achieved by removing things such as a vertical grip or unneeded accessories.
About 2 hours of power can be drawn from the supplied battery pack, or alternately you can power the inverter with the supplied 12 volt cigarette adapter. The unit ships in a self contained pelican case and includes a trickle charger. All of the Kenyon Gyro units are sealed with Helium to reduce the internal air resistance on the gyro wheels. Please do not attempt to open the unit as there are no serviceable parts inside the gyro housing. The inverter unit where the battery and gyro plug in does house a small fuse which is field serviceable. The battery should be stored in the charged state to avoid damaging the cells in the battery.
Please turn the unit off once the Yellow light comes on, using the battery further will damage the battery and we'd hate to charge you for a replacement. :)
If you have any other questions, or would like to tell us about your project, please give us a ring and we'll be glad to help.
Check out this quick review from our friends at Shade Tree Films
• Outside dimensions=7.64"(19.398 cm) x 7.64"(19.398 cm)
• 3.7" (9.398 kg) high without accessories
• Draws 4.6 amps (@12 volts) at start up dropping to 2.2
amps after 8-10 minutes - 115 VAC 400 Hz
•Can run up to 2 hours on fully charged Ken Lab battery pack
•Stabilizes equipment in the 7-11 lb. (3.17-4.99 kg) range