Rent a DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer at LensProToGo.com

The DJI Ronin-M Gimbal is all it's big brother is cracked up to be but a bit smaller and a bit lighter (thankfully!!!) The Ronin-M can support camera and lens systems up to 8 pounds, this means it's great for smaller cameras like Sony a7s II, Panasonic GH5, and DSLRs. You CAN run a stripped down C100 with a light lens, but clearance is super tight. The Ronin-M includes a remote control for two operators, allowing one to carry the rig and another to control panning and tilting. Just like any gimbal, set up is key; you really have to take your time and balance your rig properly so the gimbal has less work to do. The included "smart" battery can last up to 4 hours with light use, but plan on about 2 hours of shooting under heavy loads and lots of movement.

The DJI Ronin-M connects to iOS devices using the DJI Assistant app, available for free here. You can also use a Windows PC with free software here. The password to connect your phone to the app is "123456"

Please see the Ronin-M instruction manual here. After you've read the manual, check out some helpful videos here.

Here's a great video by Greg on how to balance a Gimbal:

General	Built-In Functions Three Operation Modes · Underslung Mode · Upright Mode · Briefcase Mode Built-in, independent IMU module DJI Specialized Gimbal Drive Motors with Encoders Bluetooth Module USB Connection 2.4GHz Receiver Temperature Sensor DJI Advanced 32-Bit DSP Processor D-Bus Receiver Supported
Peripheral	Camera Tray Dimensions Maximum depth at center of mass on camera base plate: 120mm Maximum height measured from top of camera base plate: 195mm Maximum width: 160mm Accessory Power Connections 12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1 GCU Input Power 4S Ronin-M Battery Connections 2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0 PC Assistant Software Requirements Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)?Mac OS X 10.9 or above Mobile Assistant Software Requirements Mobile Device: iOS 7.0 or above
Mechanical & Electrical Characteristics	Working Current · Static current: 300mA (@16V) · Dynamic current: 600mA (@16V) · Locked motor current: Max 10A (@16V) Operating Temperature -15° C ~ 50° C (-5° F ~ 120° F) Weight 2.3kg (5.07lb) fully loaded with handlebar Gimbal Dimensions 500mm(W) x 210mm(D)x 420mm(H)
Working Performance	Load Weight (Reference Value) 3.6kg (8lb) Angular Vibration Range ± 0.02° Maximum Controlled Rotation Speed · Pan axis: 90°/s · Tilt axis: 100°/s · Roll axis: 30°/s Mechanical Endpoint Range · Pan axis: 360° · Tilt axis: +105° /-190° · Roll axis: ± 110° Controlled Rotation Range · Pan axis control: 360° · Tilt axis control: +105° /-190° · Roll axis control: ± 25°