- PW Flex TT5 for Canon is out of stock. Please remove the item from your cart to continue.
|
Prices include standard round trip shipping costs
|
|
PW Flex TT5 for Canon
This is perhaps one of the most exciting products to hit the photography market in a long time. It combines the virtual 100% reliability of the radio frequency Pocket Wizard to fire an off camera flash (or many of them) with the TTL auto functionality of your Canon flash, like the 580EX II.
While the original Pocket Wizard is wonderfully reliable, it renders your flash to be in complete manual mode. And while the TTL functionality of the 580EX II is fantastic, it's well....not exactly reliable in terms of firing an off camera flash, particularly when you're in a big room or outside.
This product takes care of both of those issues. The Mini model can be used on Camera (transmitter) to trigger other flashes. The Flex model can be used to either receive or transmit. Please visit the Pocket Wizard site for a more thorough demonstration. These units are backwards compatible as older receivers will receive the signal but it will NOT be TTL.
Please note that you do need two units at a minimum, one unit on the camera (either a Mini or Flex) and one Flex for each off camera flash.
PLEASE NOTE THAT THESE UNITS ARE MADE FOR CANON OR NIKON AND ARE NOT INTERCHANGEABLE
Click here for online version of the manual.
|
Prices include standard round trip shipping costs
|
|
PW Flex TT5 for Canon
|
TTL Compatibility |
Canon E-TTL II |
|
Frequency: |
340.00 - 354.00 MHz US FCC / IC |
|
Channels: |
52 Channels over 26 Frequencies (FCC/IC) |
|
Antenna: |
2.7" (6.9 cm) rubberized with 180 degree swing |
|
Transmit output power: |
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt) |
|
Range Performance: |
30 to 800 feet (10 to 240 meters) for E-TTL II triggering depending on flash used, antenna orientation and other variables. 30 to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables. For more info, click here. |
|
Mounting: |
Hot Shoe, 1/4-20, lanyard, velcro |
|
Maximum Shooting Rate Frames per second (fps) |
8 fps for E-TTL II and normal triggering |
|
Power / Channel Switch |
OFF - C.2 - C.1 |
|
Zone Select Switch |
A-B-C (matches Canon slave groups) |
|
Status Indicator |
LED: Green, Amber, Red status indications |
|
Camera / P1 Port |
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous |
|
Flash / P2 Port |
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized |
|
Minimum Receive Contact Time |
Camera / P1 Port = 80 milliseconds Flash / P2 Port = 500us |
|
Voltage Present |
3.3 VDC (all pins) - safe for all cameras |
|
Hot Shoe voltage protection: |
Hot Shoe: up to 50V |
|
USB: |
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground |
|
Operating Temperature |
Above -15° C (5° F) and below 50° C (120° F). |
|
Storage Temperature (without battery) |
Above -30 C (-22 F) and below 85 C (185 F) |
|
Construction |
High impact plastic, captive battery door |
|
Power |
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB |
|
Battery Life |
60 + Hours |
|
Dimensions |
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered |
|
Weight |
5.4 oz (153 grams) 3.8 oz (108 grams) without batteries |
|
Prices include standard round trip shipping costs
|
|
